Rotary Encoder

Universal Rotary Encoder

rotary-encoder
encoder-40mm-universal-connector-plate
encoder-flange-universal-connectortype
encoder-58mm-flange-universal-wire-type
encoder-40mm-universal-connectortype
Previous
Next

This encoder can be programmed to give any type of output for any PPR value.

The type of output can be Incremental ,single turn, multi turn

The resolution may vary from 1 till 8192.

 It can be readily used for / with

  1. spindle motor,
  2. PLC / CNC controls
  3. speed regulations,
  4. Tool Turrets,
  5. Tool changer magazine (HMC, VMC),
  6. position control of rotary tables,
  7. Press wheel true position indicator,
  8. 6 Digit counters,
  9. D.R.O., Ready
  10. Cut To Length
  11. RPM/Speed-o-meter,
  12. Tacho-Gen,
  13. Direct motor control
  14. and many more applications.

We can provide Custom Outputs also.

It involves “No delicate disks or critical settings”, is rugged, compact and the most economical.

The mounting is compatible with many systems with a flange that can also be custom made if required.

 Mode 1-4 is basic incremental rotary encoder with line driver output. Even decimal value PPR is also possible. Guaranteed phase shift with pulse smoother.

 Mode 5-8 can run a servo motor in relation to any rotating part (Electronic gearing).

 Mode 9 is a programmable “Tacho generator” with PWM & 7 bit binary output.

 Mode 10 is a versatile 6 digit “Digital RPM meter” with a least count of 0.1 RPM and peak speed of 25000 RPM, built-in averaging control, all in single setting.

 Mode 11 is a high speed counter / DRO with relay output. Peak speed 25000 RPM.

 Mode 12 is “Absolute 24 Bits Rotary Encoder” with Multiplexed output.

 Mode 13-14 is ready output for programmable “Cut to Length” application.

 Mode 15-16 Absolute “Multi-Tool Magazine” position reader with Stop pulse. (HMC / VMC)

 Mode 17-20 is Binary “Absolute Rotary Encoder” with Strobe, Parity and Stop Bits.

 Mode 21-24 is Gray Scale “Absolute Rotary Encoder” with Strobe, Parity and Stop Bits.

 Mode 25 is Single turn 12 Bits “Absolute Encoder” with multiplexed output.

 Mode 26 is Single turn Digital Programmable 4 Digit “Absolute Encoder” (0.1 Deg).

 Mode 27-28 is a direct VFD control. It takes “Pulse-Direction” input signal from any standard PLC and outputs “Forward / Reverse.” command with 16 step speed control to run a standard induction motor like a servo-motor.